MC-8000 DSCOwner’s Manual
10Note: This HEXAGON HEAD BOLT is only for mounting the bracketwith hardware. Do not use it for installing the radio in themounting bracket.Connect th
11SquelchTurn SQUELCH fully clockwise. This raises the “Squelch Gate” so high that only very strongsignals can get through.Turn SQUELCH fully counterc
12nications. Press 16/9/TRI a third time to return to the channel selected prior to accessingChannel 16/Channel 9 communications.The display will indi
13Normal ScanNormal Scan is performed only when the memory CH is registered.To turn Normal Scan On, press and hold 16/9/TRI for 2 seconds in Triple Wa
142. The Distress call is transmitted and it waits for about 210 -270 seconds. This is continued internally. After the Distresscall has been sent, the
15Menu Operation1. DIGITAL SELECTIVE CALLING (DSC)Digital Selective Calling is a process of establishing a radio call, it has been chosen by theIntern
164. WAITING appears followed by the individual you have se-lected, and the radio use 70 CH while transmitting.5. When you receive the individual ack
171-C. ALL SHIPS1. Press SELECT at DSC CALL (To enter DSC CALL, see page15). INDIVIDUAL appears.2. Press CH ▼▼▼▼▼ twice to select ALL SHIPS.3. Press S
182. Display POS REQUEST using CH ▲▲▲▲▲ or CH ▼▼▼▼▼.3. Press SELECT. The individual directory appears.4. Select the name to request the individual’s p
193. Press SELECT. The individual directory appears.4. Press SELECT to send your position information.5. The following screen appears.1-F. STANDBYThe
ContentsIncluded with your MC-8000 DSC ... 4Controls and Indicat
201. Press SELECT at DSC CALL (To enter DSC CALL, see page15). INDIVIDUAL appears.2. Display CALL WAIT using CH ▲▲▲▲▲ or CH ▼▼▼▼▼.3. Press SELECT. The
212. SETUP1. Press MENU to enter Menu Operation.2. Press CH ▼▼▼▼▼ once to display SETUP, and press SELECT.SETUP has some options as follows. To exit,
224. Select On. Using CH ▲▲▲▲▲ or CH ▼▼▼▼▼, and press SELECT. Theradio returns to the channel display screen and the icon appears.5. When the radio re
233. Press SELECT. The registering screen appears. You can nowadjust the time for your local area using CH ▲▲▲▲▲ or CH ▼▼▼▼▼.4. The time will be enter
242. Display DIRECTORY using CH ▲▲▲▲▲ or CH ▼▼▼▼▼.3. Press SELECT. The DIRECTORY menu appears. Use CH ▲▲▲▲▲or CH ▼▼▼▼▼ to select the menu.2-D-1. NEWTh
254. After you edit the person’s name, you can edit the MMSI. Thenumber will be entered when SELECT or the different numberkey is pressed, and the bli
263. Press SELECT to enter the setting mode.4. If you want to change this mode to off, press CH ▼▼▼▼▼ once.(Default is set as On).5. Press SELECT. The
27Example: OFWhen the radio receives a position request, the following screenappears. You can select whether reply the request or not. If youwants to
282-H. GROUP MMSI1. Press SELECT at SETUP (To enter SETUP, see page 21).2. Display GROUP MMSI using CH ▲▲▲▲▲ or CH ▼▼▼▼▼.3. Press SELECT. The group MM
294. You can now enter the USER MMSI code. Press CH ▼▼▼▼▼ toincrease the number, CH ▲▲▲▲▲ to decrease. The number will beentered when SELECT is presse
Daylight Savings On/Off ... 23Directory ...
303. SYSTEM1. Press MENU to enter Menu Operation.2. Press CH ▼▼▼▼▼ twice to display SYSTEM, and press SELECT.SYSTEM has 3 options as follows. To exit,
315. When you find the most favourable brightness, press theSELECT. The radio returns to the LAMP ADJUST screen.Note: The backlight settings are off,
32VHF FM Marine Radio Telephone Channel and Functions(International Channels)CHANNEL FREQUENCY (MHz) TYPE OF SHIP SHIPDESIGTRANSMIT RECEIVETRAFFIC TO
33SpecificationGeneralControls : On-Off/Volume, SquelchStatus Indicators : TX (Transmit), TRI (Triple Watch), HI (High), LO (Low), I, MEM, DSC, (Alarm
34TroubleshootingIf the MC-8000 DSC does not perform to your expectations, try the suggestions listed below.If you cannot get satisfactory results, ca
35CERTIFICATE OF CONFORMITYWe, GROUPE PRESIDENT ELECTRONICS, Route de Sète,BP 100 – 34540 Balaruc – FRANCE,Declare, on our own responsibility that the
Siège Social / Head Office France – Route de SèteBP 100 – 34540 BALARUCSite internet : http://www.president-electronics.comE-mail : groupe@president-e
4Included with your MC-8000 DSC
5Controls and IndicatorsFront Panel/Microphone1.PTT Switch - Press to transmit and release to receive.2.CHANNEL ▲ / ▼ - These keys are used to change
6Rear Panel Connectors1231. DC Jack2. ACC Connector3. Remote Connector4. Antenna Connector4ACC Connectors
7LCD Display12 345679811WX101.TX (Transmit) - Indicates transmitting.2.HI (High) - Indicates transmit output is 25 Watts.3.DSC - Indicators the radio
8Flow Chart for Menu OperationDSC CALLINDIVIDUALGROUPALL SHIPSPOS REQUESTPOS SENDSTANDBYCALL WAITEXITSETUPALARM CLOCKLOCAL TIME ADJUSTDAYLITYE SAVEDIR
9InstallationCaution:The MC-8000 DSC will only operate with a nominal 12 volt negative ground batterysystem.It is important to carefully determine the
Comentários a estes Manuais